11

I know that there are several questions about the naturalness (or hierarchy or fine-tunning) problem of scalars masses in physics.stackexcange.com, but I have not found answers to any of the following questions. Suppose that we add to the SM Lagrangian the following piece:

$(\partial b)^2-M^2 \, b^2-g\, b^2 \, h^2+ \, ....$

where $b$ is a real scalar field (that is not contained in the SM) and $h$ is the Higgs real field. Then the physical mass $m_P$ of the Higgs is given by the pole of its propagator (I am omitting numerical factors):

$m^2_P=m^2_R (\mu)+I_{SM}(\mu)-g\, M^2\, ln(M/\mu)$

where $m_R(\mu)$ is the renormalized Higgs mass, $I_{SM}(\mu)$ (which also depends on the SM couplings and masses) is the radiative contribution of the SM fields (with the Higgs included) to the two point function of the Higgs fields (note that is cut-off independent because we have subtracted an unphysical "divergent" part) and the last term is the one-loop contribution of the new field $b$ (where we have also subtracted the divergent part).

I have two independent questions:

  1. The contribution of the $b$ particle (the last term) is cut-off independent (as it has to be) so the correction to Higgs mass is independent of the limit of validity of the theory, contrary to what is usually claimed. However, it does depend on the mass of the new particle. Therefore, if there were no new particles with masses much higher than the Higgs mass, the naturalness problem would not arise. It could be new physics at higher energies (let's say beyond 126 GeV) as long as the new particles were not much heavier than the Higgs (note that I'm not discussing the plausibility of this scenario). Since this is not what people usually claim, I must be wrong. Can you tell me why?

  2. Let's set aside the previous point. The naturalness problem is usually stated as the fine-tunning required to have a Higgs mass much lighter than the highest energy scale of the theory $\Lambda$, which is often taken as GUT scale or the Planck scale. And people write formulas like this: $\delta m^2 \sim \Lambda^2$ that I would write like that: $m^2_P=m^2 (\Lambda) + g\, \Lambda^2$. People think it is a problem to have to fine-tune $m^2 (\Lambda)$ with $\Lambda^2$ in order to get a value for $m^2_P$ much lower than $\Lambda^2$. And I would also think that it is a problem if $m^2 (\Lambda)$ were an observable quantity. But it is not, the observable quantity is $m^2_P$ (the pole of the propagator). I think that the misunderstanding can come from the fact that "interacting couplings" (coefficients of interacting terms instead of quadratic terms) are observables at different energies, but this is not the case, in my opinion, of masses. For example, one talks about the value of the fine structure constant at different energies, but the mass of the electron is energy independent. In other words, the renormalized mass is only observable at the energy at which it coincides with the physical mass (the specific value of the energy depends on the renormalization procedure but it is usually of the order of the very physical mass), while one can measure (i.e. observe) interacting couplings at different energies and thus many different renormalized couplings (one for every energy) are observables. Do you agree?

*(Footnote: since free quarks cannot be observed the definition of their masses is different and one has to give the value of their renormalized mass at some energy and renormalization scheme.)

Thank you in advance.

Diego Mazón
  • 6,819
  • 1
    All you've noticed is yet another runaway instability in the Higgs mass, from adding heavy particles. But you don't need heavy particles. This has been asked many times here already--- the bare couplings and bare masses are observable you extract them from very high energy scattering experiments. They have to be tuned just so to make the Higgs nearly massless, and this is ridiculous. That's heirarchy. – Ron Maimon Jul 18 '12 at 01:39
  • Thank you, Ron. This is the key point: "bare masses are observable you extract them from very high energy scattering experiments", I though that physical (observable) masses were propagator's poles... I'm very surprised to hear that. Can you give me a reference? – Diego Mazón Jul 18 '12 at 01:47
  • I don't know the precise reference, I can give you the argument--- the parameters you measure for scattering of Higgses at high energy $\mu$ are those which are roughly the bare parameters with the cutoff of order $\mu$. The reason is that the renormalization scheme fixing the scale at $\mu$ makes the corrections at $\mu$ vanish, which corresponds to removing the degrees of freedom at scales higher than $\mu$. Modern measurements are made at high energies, and the parameters are therefore at a subtraction scale which varies. – Ron Maimon Jul 18 '12 at 02:11
  • I have a general problem with your question -- I think that I misunderstand something. You have stuff, that depends on $\mu$ and you are keeping saying that it is "cutoff independent". Can you clarify what $\mu$ is then? – Kostya Jul 18 '12 at 09:05
  • Sure, Kostya. That expresion has been regulated with dimensional regularization. The meaning of $\mu$ depends on the subtraction scheme one chooses. In Minimal Subtraction (or its sister MS bar), $\mu$ is the parameter with mass dimension one has to introduce to keep the couplings dimensionless. In non-minimal subtraction schemes, $\mu$ is the energy scale at which one subtracts the cut-off ($1/\epsilon$) dependent part. Of course, the argument does not change if one uses another regularization procedure like Pauli-Villars or a sharp cut-off. Thank you. – Diego Mazón Jul 18 '12 at 15:47
  • @drake: Generally, what Kostya is saying is that $\mu$ is a stand-in for a cutoff in dim-reg, and it serves the same role. The $\mu$ dependent stuff is cutoff dependent in the usual way. – Ron Maimon Jul 18 '12 at 17:52
  • $\mu$ is not a high-energy or ultraviolet parameter. I think we all know what is $\mu$ in dimensional regularization. It does not cut-off any integral as a sharp cut-off or an arbitrary big mass in Pauli-Villars. – Diego Mazón Jul 27 '12 at 02:09
  • @drake: Yes, that's one of the intuition problems in dim-reg--- it superficially looks like $\mu$ is not cutting things off. It's a substraction scale, and the subtraction scale is a stand-in for the cutoff. – Ron Maimon Jul 27 '12 at 04:22
  • @RonMaimon: I don't like semantic discussions, call it as you like. I think I understand why you say it is a stand-in for the cut-off. But we should agree that is not an ultraviolet cut-off, that the value of $\mu$ must be chosen in such a way the perturbative expansion make sense and therefore so that your logs be as small as possible. It doesn't make sense to take $\mu$ much bigger that the typical energy scale of the problem. So $\mu$ in the question must be chosen close to $M$, where $M$ is the largest particle's mass of the theory instead of the GUT or Planck scale. – Diego Mazón Jul 27 '12 at 15:45
  • @drake: For best fit you take $\mu$ to be the energy of the process you are interested in studying, and this can be GUT scale. The running in $\mu$ is the same as the running in a cutoff. – Ron Maimon Jul 27 '12 at 17:05
  • "For best fit you take $\mu$ to be the energy of the process you are interested in studying" = "the value of $\mu$ must be chosen in such a way the perturbative expansion makes sense and therefore so that your logs be as small as possible". In general, the running (even at one loop) depends on the subtraction scheme you use. For instance, the running in MS is not the same as in a mass-dependent subtraction scheme even when one uses in both cases dimensional regularization (in general). I think you know this. – Diego Mazón Jul 27 '12 at 17:18
  • @RonMaimon: When the running in $\mu$ is the same as the running in an ultraviolet cut-off is roughly because in the former case one has a fixed ultraviolet cut-off and one moves the subtraction scale, while in the latter one moves the ultraviolet cut-off. The running tells how the parameters change as one includes modes and degrees of freedom in the theory. We both understand this. Do you have any answer to the questions? – Diego Mazón Jul 27 '12 at 17:24
  • @drake: The $\mu$ doesn't have to be chosen well! You can choose it wrong. The reason I don't answer the question is because I don't see a question here--- you are just seeing the instability of the Higgs mass to high-scale new stuff, and you are claiming you don't see it for some psychological reason I don't understand that involves the $\mu$. – Ron Maimon Jul 28 '12 at 04:50
  • @RonMaimon: If one doesn't choose $\mu$ properly then the perturbative expansion breaks down and one cannot say anything. – Diego Mazón Jul 28 '12 at 06:15
  • @drake: How does it "break down"? If the coupling is small enough, you just go to higher order. You don't have to make the coupling smallest possible, although this is most convenient. Of course perturbations break down at high enough order, but this is independent of the $\mu$ you choose--- it just breaks down period. You can redo RG as summing higher order leading logarithms. – Ron Maimon Jul 28 '12 at 06:25
  • @RonMaimon For a given coupling, one needs a log small enough in order to make perturbation theory. The "effective" expansion parameter is the coupling times the log. – Diego Mazón Jul 28 '12 at 06:49
  • @drake: Yeah, I agree, but if the coupling is small enough, it's consistent to a reasonably high order no matter what the log is. It's not a clear mistake to use a wrong $\mu$, it just means you have to go to higher order to get the same accuracy. – Ron Maimon Jul 28 '12 at 06:58
  • For question #1, I think you've mostly just phrased the hierarchy problem in a more careful language. The advantage of the cutoff procedure is that it allows you to demarcate a scale at which you believe your theory is no longer a good description. Even if there are no new particles much heavier than the Higgs, at the least we expect our theory to break down around the Planck scale. From the point of view of EFT then it might make sense to be interested in the cutoff. – gn0m0n Nov 17 '14 at 21:26
  • As for #2, this is interesting. I'd never thought about that difference between masses and interaction couplings. So are you saying ("the renormalized mass is only observable at the energy at which it coincides with the physical mass") that $m^2_p (\mu = m_p) = m^2_{\text{bare}} (\mu = m_p)$? And then that requiring $m_{\text{bare}} (\mu)$ to cancel the $\Lambda$ term shouldn't disturb us since $m_{\text{bare}} (\mu)$ is unobservable away from $\mu=m_p$? – gn0m0n Nov 17 '14 at 21:35
  • Note that I'm not wholeheartedly endorsing the cutoff procedure, just playing devil's advocate. And from the EFT point of view, it seems well-motivated. – gn0m0n Nov 17 '14 at 21:39

0 Answers0