so my cloth simulation going through the mesh someone help me with this
Asked
Active
Viewed 1,094 times
0
-
1hello could you please share your file? https://blend-exchange.com/ – moonboots Aug 18 '22 at 08:18
-
https://drive.google.com/file/d/1zlCqP_Yxd8QKNJGwxqQIDLVzZiu9NSv_/view?usp=sharing – Nihal Aug 18 '22 at 10:01
-
Hi Nihal, could you pls add a blend file WITH your cloth modifier + settings so we can check your settings? thx and another hint: always(!) apply scale and rotation before starting a physics simulation. – Chris Aug 18 '22 at 10:41
-
Does this answer your question? How to stop surface of cloth plane from intersecting my cylinder? – quellenform Aug 18 '22 at 13:25
-
@Chris https://drive.google.com/file/d/1zlCqP_Yxd8QKNJGwxqQIDLVzZiu9NSv_/view?usp=sharing . this is my blend file , i already applied the scale. – Nihal Aug 18 '22 at 15:17
-
1Hello, no cloth simulation has been assigned to the plane in the file you've shared, could you please share your file again, with the cloth simulation, and only the plane + car? – moonboots Aug 18 '22 at 15:58
-
sorry for the late response, having some network issue in my area heres another blend file @moonboots https://drive.google.com/file/d/1-OCAuPnodx8zit8TQNmK7GicOtt8fRJu/view?usp=sharing – Nihal Aug 19 '22 at 09:51
-
My computer is a bit too slow for this simulation, you probably need to play with these parameters: Quality Steps, Collisions Quality and Object Collisions Distance – moonboots Aug 19 '22 at 10:17
-
Uncheck Single Sided in the Collision options. – Eman Dec 22 '22 at 07:01
1 Answers
0
this is "normal". Try increasing quality of collision and cloth. And yes, this makes the simulation slower - but more accurate. If this doesn't help, pls provide blend file.
Chris
- 59,454
- 6
- 30
- 84
-
-
https://drive.google.com/file/d/1zlCqP_Yxd8QKNJGwxqQIDLVzZiu9NSv_/view?usp=sharing here's the blend file – Nihal Aug 18 '22 at 10:03