I have a Frigidaire Gallery dual fuel range. On the left side, the smaller burner is located in the front and I want the smaller burners in the back. Is there any reason why I should not swap the jets and burners?
Asked
Active
Viewed 2,604 times
2
-
Model #FGDS3065PF ? – James Olson Jan 23 '17 at 17:36
-
1Quick check: are the feed pipes the same diameter? If so, that would suggest it's ok. – Carl Witthoft Jan 23 '17 at 18:22
-
yes, that's the one. I have not removed any jets yet. – sgw Jan 23 '17 at 18:56
2 Answers
1
The gas orfices are sized for the BTU heating of each individual burner. A burner that does not match the required orfice size of that burner may not be able to burn the gas supplied correctly: ie. too much gas, not enough air at max flame.
d.george
- 12,410
- 2
- 15
- 23
0
There's no issue, but you have to swap also the giglers. If you swap only the burners you'll have a big burner that won't lit due to too few gas and a little burner burning too high ruining your pans due to oversized gas flow.
DDS
- 2,377
- 10
- 15