-1

When programming a Bluecore bc417 chip, does UART generate messages when data is inputted to the source? For example, MESSAGE_MORE_DATA, MESSAGE_MORE_SPACE. For me, for some reason these messages are not generated for UART. They are generated only for rfcomm when I use the SPP profile. If it is possible to change the position, how? If it is possible, then show a little bit of code for the solution.

anonymous2
  • 4,872
  • 3
  • 20
  • 48
Игорь Крючковский
  • 245
  • 1
  • 5
  • 1
    yes uart source generates messages (MESSAGE_MORE_DATA and MESSAGE_MORE SPACE). I have only used Bluecore 8675 and 8670 but if the BC417 is based on CSR's XAP then they should work somewhat similarly – user17915 Apr 02 '17 at 11:23
  • 1
    For example if you connect a bluecore chip to the computer through the UART and the computer sends a UART character, it will generate a MESSAGE_MORE_DATA message in the CSR chip – user17915 Apr 02 '17 at 11:25
  • 1
    if you are connecting the chip to PC through UART check the baud rate and hardware control on/off options. It could be a pskey setting issue, search for all the pskeys that have the word "uart" in it. It might give a clue on what to try – user17915 Apr 02 '17 at 11:30
  • 1
    does the CSR baud rate match the PC baud rate? Is hardware flow control turned off in CSR and PC? – user17915 Apr 02 '17 at 11:45
  • 1
    you mean the speed and transmission parameters in the pskey are correct? – user17915 Apr 02 '17 at 12:33

1 Answers1

2

Before sending, use the function: MessageSinkTask (Sink,task) In the method main(), before the first message.

Игорь Крючковский
  • 245
  • 1
  • 5