10

Is there a simple way to switch off Dynamic evaluation for a particular cell? I usually delete the cell if it disturbs other evaluations or affects the performance too dramatically.

Szabolcs
  • 234,956
  • 30
  • 623
  • 1,263
Ernst Stelzer
  • 2,055
  • 12
  • 24
  • Can you split the camera question to a new one? I think it's better not to mix the two questions. Then I'll answer. – Szabolcs Feb 22 '12 at 13:21
  • I have split off the question about the webcam: http://mathematica.stackexchange.com/questions/2148/release-the-web-camera-after-using-currentimage Please do not mix unrelated questions in the same post if possible. Ask them separately instead. – Szabolcs Feb 22 '12 at 13:45

2 Answers2

3

You can click in the front-end

Evaluation->Dynamic Updating Enabled

to switch off dynamic updating of the cell.

In case you want to switch off evaluation of the cell, click

Cell->Cell Properties -> Evaluatable.

Artes
  • 57,212
  • 12
  • 157
  • 245
  • It should be noted that deselecting Dynamic Updating Enabled turns off all dynamic updating, and also output cells containing dynamic objects already do not have Evaluatable selected, so there is nothing to turn off. – Mr.Wizard Feb 22 '12 at 13:25
  • I did not mean anything contrary to what you said. Option for turning off evaluation of the cell can be helpful as well. The first does not deny the latter. – Artes Feb 22 '12 at 13:35
3

This hack will try to switch off/on dynamic updating on a cell by cell basis, but it appears not to be very reliable:

PaletteNotebook@
 Column[{Button["Dynamic off", 
    SetOptions[NotebookSelection[], DynamicUpdating -> False]],
   Button["Dynamic on", 
    SetOptions[NotebookSelection[], DynamicUpdating -> True]]}]

Even if it is switched off for a cell, in certain cases updating might be triggered when the mouse is above control elements in the cell.

Usage:

The code above will create a palette. Select a cell and press the off or on button to switch dynamic updating off or on.

Community
  • 1
Szabolcs
  • 234,956
  • 30
  • 623
  • 1,263
  • When used with Dynamic[Refresh[DateString[], UpdateInterval -> 1]] Off works, but On does not. But evaluating the command restarts the code. Very nice, just what I was looking for. – Ernst Stelzer Feb 22 '12 at 16:13
  • @Ernst Please use with care, as I mentioned it doesn't appear to be very robust. – Szabolcs Feb 22 '12 at 16:54