3

After I had a few issues with the ODroid C1 3.2" display I now bought an admatec C-Berry 3.2" display for the same purpose. Unlike the nice 7" display I have and that is auto-detected, this 3.2" display remained black after attaching it electronically.

So I built the BCM2835 library:

wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.48.tar.gz
tar zxvf bcm2835-1.48.tar.gz
cd bcm2835-1.48
./configure
make
sudo make check
sudo make install
cd ..

And built the C-Berry:

wget http://admatec.de/sites/default/files/downloads/C-Berry.tar.gz
tar xzf C-Berry.tar.gz
cd C-Berry/SW/fb2cberry
make -C .
cd ../tft_test
make -C .
sudo ./tft_test

I can now startx, open a Terminal and run sudo fb2cberry to mirror the main HDMI display to the small screen, but

How to I set up the 3,2" display as the main screen to run in native resolution?

Community
  • 1
Thomas Weller
  • 2,375
  • 3
  • 25
  • 51

1 Answers1

0

As far as I can see, there are two ways to go about this. Method one is to somehow go into raspi-config and force DSI output (which I don't know how to do, but is probably easier). Method two is to implement the code you mentioned above into the Pi's boot code (which is done by writing it in some file, I forgot its name :/ ), which will mirror the main HDMI display automatically during bootup.

Josh2003
  • 51
  • 3