Raspberry Pi Stack Exchange
Raspberry Pi Stack Exchange

Questions tagged [pi-zero-w]

For questions specific to the Pi-Zero W (with WiFi and Bluetooth)

The Pi Zero W adds WiFi and Bluetooth to the existing Pi Zero.

The Raspberry Pi Zero

  • A 1 GHz single-core ARM11 CPU
  • 512 MB of RAM
  • On-board Wireless LAN - 2.4 GHz 802.11 b/g/n (BCM43438)
  • On-board Bluetooth 4.1 + HS Low-energy (BLE) (BCM43438)
  • microSD card slot
  • Mini-HDMI socket
  • Micro-USB sockets (for power and data)
  • Unpopulated 40-pin GPIO header and composite video header
  • a "mini" CSI-2 camera interface - which is the same as used for the Compute Module I/O Board {needs a mini-to-standard flexible connector to use with RPi camera modules}.
  • Form factor 65 mm x 30 mm x 5 mm

See Also

774 questions
5
votes
1 answer

Does the Raspberry Pi Zero v1.3 support TensorFlow?

Does the Raspberry Pi Zero v1.3 support TensorFlow? I came across online that the ArmV7 used in above Pi board do not have right instructions to handle the above framework? Is it true?
Nik
  • 51
  • 2
3
votes
1 answer

What is the noise coming from pi zero?

I hear "futuristic" crackling nosies that are very familiar from movies. Not sure if it's coming from the pi or the power supply... the same sound is coming from BOTH the power supply and the pi. I swtiched to using a long usb cable to test. Even…
Aleksandr Levchuk
  • 63
  • 1
  • 8
3
votes
2 answers

What is eating up my data?

I have a question regarding the data usage of one of my USB 3G modems. I am currently using a Huawei E303 USB 3G dongle in a Raspberry Pi Zero W, with a normal SIM-card. I am running the RPi without any GUI, only booting to terminal window, and…
P1138
  • 31
  • 2
3
votes
1 answer

Tensorflow 1.9 and raspberry pi zero w?

I want to know if Raspberry Pi Zero is able to run the new tensorflow 1.9 ?
tereyold
  • 33
  • 1
  • 3
3
votes
4 answers

Do I need soldered headers or can I just use male breadboard pins?

I have a project that I want to make using the VEML6075. Are the pins shown below stable when plugged in or do I need to solder them or something? If I don't use that group of 5 pins, can I just use male to female breadboard cables to go from a Zero…
user112857
2
votes
1 answer

Can a Raspberry Pi Zero W be turned into an USB WiFi dongle to any USB Host like x86 PC or mini-PC?

In a project, I want to use Raspberry Pi Zero W as an USB wifi dongle to my USB Host(PC). Currently only station mode needed, but I would like it has AP mode either, just like a real Wifi Dongle. Is there anyway to do that through a few…
esky-sh service
  • 53
  • 1
  • 5
2
votes
2 answers

Can a Raspberry Pi Zero W be turned into a WiFi router and using USB cable to debian computer as it's internet connection

The question tells almost all. I have a Pi Zero W at my balcony. It's connected to my home router through wifi. For now it's running lighttp server, taking a picture every minute and measuring temperature and making a nice plot of last weeks temp…
Scion
  • 21
  • 1
  • 2
2
votes
1 answer

It happened to me -- A surface mount component got knocked off my Pi Zero W and I need to identify it as seems to have killed the WiFi

All I can tell about it is that photos online show it is brown in color. Yes, I could just get a new Pi, but I match prefer to at least attempt a repair. I did try bridging the pads to see how it would go, but the Pi would not boot in that state so…
Adam Jenkins
  • 21
  • 1
2
votes
1 answer

Component identification Pi Zero w V1.1

I have a Pi Zero W V1.1 with some missing components. please see the attached picture. Missing components are are circled red and green. if any one is able to help me identify these I would be extremely grateful. I look forward to any reply
user144117
  • 21
  • 1
2
votes
0 answers

Correct module interface to use with Raspberry Pi Zero WH

I would like to install a module on my R PI Zero W with soldered head. The avaliable interface options for the module are TTL | RS232 | USB | USB Virtual URL to module:…
pibot
  • 21
  • 2
2
votes
0 answers

Setup SD card so Pi-Zero-W looks for WPS WiFo connection

I've done some googling on the topic of the zero and WPS but most of them talk about running some commands on the zero to get it to connect WPS. The problem I am trying to solve is.... I can't run any commands until it connects to the network so…
HeneryH
  • 21
  • 1
1
vote
1 answer

Streaming music from raspotify to bluetooth audio speaker

I'm trying to create a raspberry pi which streams spotify music to a bluetooth speaker. I have a raspberry pi zero w with the latest version of raspbian stretch lite. I have my bluetooth connection and my raspotify set up. The only thing i can't…
WebdevE
  • 11
  • 2
1
vote
1 answer

Using additional Raspberry Pi wifi connections

Successfully I connected my Pi with my wireless connection and it's working properly. But if I need to go outside like a college or my friend's home. Then how will I connect the Pi?
Arjun Bardhan
  • 11
  • 2
1
vote
2 answers

DNS finds ip but cannot ping address

New to this so sorry for any mistakes. I’m trying to get my Raspberry Pi Zero to ping ‘www.google.com’ but I just get 100% packet loss. I can ping 8.8.8.8 perfectly fine, as well as my home router at 192.168.0.1. I don’t believe it’s a DNS issue…
Jeroldx
  • 11
  • 2
1
vote
1 answer

Initialize CSPRNG on boot to bootstrap entropy faster

I found that when using the firebase_admin library, first time runs of my script would error running, but would eventually start working. The problem has been isolated to the way the Python cryptography library is initialized. I received this…
charliesneath
  • 135
  • 9
1
2 3 4