0

You guys will probably laugh at me for asking dumb questions...but...here's my issue. Any help would be forever appreciated!

I followed the instructions perfectly from a YouTube video by ETA prime...

https://www.youtube.com/watch?v=09DQCOr6zQM&t=1174s&disable_polymer=true

I bought a SD card on Ebay that was pre-loaded with Retropie...

https://www.ebay.com/itm/RetroPie-SD-Card-32gb-for-Raspberry-Pi-3-B-14000-Games-36-Systems/223485417112?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Here's my issue...I hooked everything up exactly like the video and I am getting a lightning bolt at the top right of the screen. From my limited research, it seems like that is a Low Voltage warning. However, from further research, it also seems like there might be some software issues.

I have no idea what to do now!

Any suggestions?

Eric
  • 1
  • Welcome to Raspberry Pi. We never lough about questions because there are no dump questions, only dump answers ;-) The Raspberry Pi is just made for learning. But please don't expect that we follow videos or tutorials to understand your question, tl;dr. Instead explain what your problem is. You may take the short Tour and visit the Help Center to get an idea how things work here. At first step to verify your RasPi I suggest to run Raspbian Buster first. – Ingo Nov 28 '19 at 20:23
  • start by telling us what model Pi – Milliways Nov 28 '19 at 21:08

0 Answers0