I apologize for the lack of knowledge.
I am attempting to Hibernate / leave all open applications open, unplug power take the PI somewhere else and reboot starting up right where I left off.
This way if I am working on multiple documents I can hibernate and take the PI4 somewhere else without saving everything closing everything and shutting down.
Thanks for any help
walk away without saving.... bad practice .... always save your work ....walk away without shutting down appsis ok – jsotola Feb 07 '20 at 02:11systemctl hibernatefrom the terminal. MAKE SURE TO SAVE ANY OPEN WORK BEFORE YOU DO THIS. – user96931 Feb 07 '20 at 02:49End Goal: PI mobility without shutting down. Switch from wall to battery and back
How I accomplished this: HOT SWAP. Disclaimer: I am willing to loose my files on my PI so don't try this at work.
Using GPIO Pin 3 --V5 and Pin 5 --Ground | some 18650's | and a DC-DC XL4015 to buck regulate the voltage from batteries down to 5v. I connect the output from my XL4015 into Pin's 3 and 5 and leave it at all times. While running from Type C power input I will plug the batteries into the XL4015 and then disconnect the type C and vice versa to go from batteries to wall.
– yourmother Feb 13 '20 at 18:25