2

When I run raspistill -o cam.jpg I get

mmal: mmal_vc_component_enable: failed to enable component: ENOSPC
mmal: camera component couldn't be enabled
mmal: main: Failed to create camera component
mmal: Failed to run camera app. Please check for firmware updates

I've tried to update the raspi, disable and enable the camera and reboot. The camera work perfectly fine yesterday.

Bex
  • 2,929
  • 3
  • 25
  • 34
estrella95
  • 21
  • 1
  • 2

2 Answers2

1

try running: vcgencmd get_camera

it should output something like:

supported=1 detected=0

I recently started messing around with a camera on my pi and I found the connectors to be really fussy and hard to securely seat on the board. If it says detected=0 then you probably just need to push the ribbon in on the board or the camera.

Matt Cooper
  • 11
  • 2
0

I get this error every so often. Try turning it off and reseating the ribbon, I usually do both ends to save time. I don't know what causes it as mine are all fixed in place and not much nudges the ribbon? Craig

Craig
  • 606
  • 4
  • 14