Ethernet is a family of wired computer networking technologies for local area networks (LANs).
Questions tagged [ethernet]
772 questions
37
votes
14 answers
Is there a serious alternative to the Raspberry Pi that includes Gigabit Ethernet?
While there are a lot of alternatives (many of them mentioned here) to the Raspberry Pi, only a few of them sport Gigabit Ethernet. But what's worse, upon a closer look none of them are a real alternative, having one or more of the following…
Roman
- 489
- 1
- 4
- 6
3
votes
2 answers
Ethernet not working on newest version of Raspbian installed with NOOBS
I have recently received a Raspberry Pi computer, and the ethernet is not working. It was not working with the Pre-Flashed Raspbian OS, and I installed it again with NOOBS, and it wasn't working. Can you please help me?
Edit: At request of user,…
user2603709
- 31
- 3
2
votes
1 answer
Network problem on ethernet with raspberry Pi 2
I'm unable to get an ethernet connection with a raspberry Pi 2 over a cat7 cable of 40m. It works with my laptop, works over a short cable with same Pi. I used a same alimentation cable of 2.0A 5V
Cat7 cable
The reason I choosed cat7 cable was the…
Philippe Gachoud
- 277
- 2
- 14
2
votes
2 answers
Ethernet drop out
I've just installed Raspbian.
Loaded it up with ethernet (led is on).
Everything went smooth for about an hour.
Left it while programming in a text file.
Then the internet went down. tried to ping 8.8.8.8, it says
connect: Network is…
AFwcxx
- 141
- 1
1
vote
2 answers
Pi is connected to laptop via ethernet cable, but ifconfig is showing only l0 and eth0 , not wlan0?
I am connecting a Raspberry Pi with laptop via Ethernet cable, and I am able to do SSH by PuTTY and Xming. If I do ifconfig in the pi's command line interface, it shows only l0 and eth0, no wlan0.
In many posts people suggested downloading network…
tsoulb
- 11
- 1
1
vote
1 answer
Let PI ask a new IP address every time the ethernet cable is plugged in
I'm trying to let my Raspberry Pi ask for a new IP address everytime an ethernet cable is plugged in. So it doesn't only ask for an IP address when the Pi is booting.
jrust
- 78
- 1
- 2
- 10
1
vote
0 answers
Raspberry ethernet problem
Hello I have a Raspberry 2b model of 2014 it has no wireless internet system so I'm with having a ethernet. First I tried to connect it to my laptop via Lan, because having no monitor and the wifi router is far from my room. The first try I did it,…
REM
- 21
- 1
1
vote
3 answers
Ethernet Connection
My college Ethernet connection requires a username and password to access the internet. Is there a way to enter the username and password without using a GUI and lunching a web browser to log in?
Maybe I could write a program to specifically log in…
user12207
- 11
- 1
1
vote
2 answers
Internet Connection
I'm a newbie to the Raspberry world.
Just bought a Raspberry 4 model B and having problems connecting it to the internet.
I am using an ethernet cable but the device will not connect to the internet. The network lights (next to the connector) light…
AviHarari
- 11
- 4
0
votes
1 answer
Local network speed between devices
I have Raspberry Pi 3 B+ with IP 192.168.0.100 and Rock Pi 4 B with IP 192.168.0.200. Both in the same network connected to TP-Link 1043N V5 router. Both Pis have 1Gb Ethernet. However I am not able to use the whole bandwith even if it is not used…
pbies
- 298
- 4
- 13
0
votes
1 answer
Problem connecting pi b+3 model with ethernet cable on a windows machine
I've read multiple guides on how to connect a raspberry pi with a pc through internet yet I always fail . I have a windows machine,I did share the wifi connection with the ethernet which the pi is connected to. I also did activate ssh from the sudo…
Mike
- 1
- 1
0
votes
1 answer
Raspberry Pi Model A ethernet
I've tried to connect my RPi on anyone internet hotspot, but haven't ethernet connection and it block me to install or update any application on my RPi.
Today i found it…
Edilson
- 195
- 4
- 14
0
votes
1 answer
RPI registers often at router
For some reason, my RPI registers many local ip addresses at the router. It is connected by ethernet cable, and doesn't reboot in the meantime.
I can't find anything about online...
Here's a screenshot from the router admin:
Any suggestions?
DA--
- 223
- 2
- 6
0
votes
1 answer
Raspberry Pi Ethernet connection
I've been using my raspberry pi through Ethernet connection normally. I am powering it through microUSB via my laptop's USB port. Everything was working normally until I installed a new version of gcc by following this guide. After successfully…
0
votes
0 answers
KSZ9896c Ethernet Switch Packet Loss
I built a shield for my Raspberry Pi with an ethernet switch. I used a KSZ9896c as the switch and 4 LAN ports. I attached a sensor via ethernet to one of the ports. Unfortunately I get packet loss after a few minutes. At the start of the…
Joh
- 101