I have a failed logical volume on an HP Smart Array P401i with vmWare installed. Is there any way to rebuild the logical volume without losing precious data?
Asked
Active
Viewed 665 times
1 Answers
0
Yes it will rebuild the disk for you. dig up a replacement disk (same specs as the failed disk or better) and swap it out . You may notice some degradation while it rebuilds. look at disks 3-7, at least one of them will have a warning light on.
Larryc
- 315
-
Yes, I have already replaced the defective disk, all of them are now blinking green. how long will it take to rebuild? – Biggy Dongsky Natski May 24 '19 at 06:12
-
It varies depending on how big the disk is, how fast the machine is, etc... I would wait 24 hours and the check it, should be done or close to it by then. There should be a hp application installed that you can use to watch it's progress.. – Larryc May 24 '19 at 06:36
-
Thank you very much! Keeping my finger crossed. – Biggy Dongsky Natski May 24 '19 at 08:01