Questions tagged [nat]

In computer networking, network address translation (NAT) is the process of modifying network address information in datagram (IP) packet headers while in transit across a traffic routing device for the purpose of remapping one IP address space into another.

Most often today, NAT is used in conjunction with network masquerading (or IP masquerading) which is a technique that hides an entire IP address space, usually consisting of private network IP addresses (RFC 1918), behind a single IP address in another, often public address space. This mechanism is implemented in a routing device that uses stateful translation tables to map the "hidden" addresses into a single IP address and readdresses the outgoing Internet Protocol (IP) packets on exit so that they appear to originate from the router. In the reverse communications path, responses are mapped back to the originating IP address using the rules ("state") stored in the translation tables. The translation table rules established in this fashion are flushed after a short period unless new traffic refreshes their state.

As described, the method enables communication through the router only when the conversation originates in the masqueraded network, since this establishes the translation tables. For example, a web browser in the masqueraded network can browse a website outside, but a web browser outside could not browse a web site in the masqueraded network. However, most NAT devices today allow the network administrator to configure translation table entries for permanent use. This feature is often referred to as "static NAT" or port forwarding and allows traffic originating in the "outside" network to reach designated hosts in the masqueraded network.

Because of the popularity of this technique (see below), the term NAT has become virtually synonymous with the method of IP masquerading.

Network address translation has serious drawbacks on the quality of Internet connectivity and requires careful attention to the details of its implementation. As a result, many methods have been devised to alleviate the issues encountered. See the article on NAT traversal.

2031 questions
7
votes
1 answer

How long do Nat mappings live for?

My simple understanding of NAT is something like this could happen: Two client PCs 192.168.1.2 and 192.168.1.3 open up a connection with src port = 12345. The gateway receives these and needs to use NAT, so one of them stays as 12345 and the other…
Alan
  • 189
6
votes
1 answer

Setting Up NAT Hairpinning to Connect to Site from an Internal IP Address

We use a WordPress plugin that checks for broken links. It uses cURL to do this. External links work fine but internal ones, not so much. The connection is refused. Talked to our host about this and they said "we put the servers on an internal…
6
votes
9 answers

How common is NAT within companies (one public ip address)?

How common is for companies to let many users share only one public ip address? I hope the answer is "not very common" since I'm developing software that depends on the ip number being pretty much unique.
5
votes
2 answers

Where to find symmetric NAT?

Currently i'm working on some NAT traversal code (that allows to computers each behind it's own NAT to communicate with each other). But, surprisingly, i can't find any symmetric NAT's! (it's the most hard case). Anyone knows where can i find one,…
grigoryvp
  • 3,795
5
votes
3 answers

How many valid NAT mappings can a common NAT support?

How many NAT mapping rules (that is, mappings between internal, private IP:PORT, and externally mapped IP:PORT) can a common NAT box support? Is there a limit in such number (that is, how many rules can be 'active' at the same time) ?
5
votes
2 answers

How does NAT keep track of connections

Given a NAT where multiple PCs are sharing one IP address, how is NAT able to know where to send the incoming data to. Does it translate th SYN-ACK ids?
700 Software
  • 2,273
3
votes
3 answers

How to implement Nat loopback/reflection?

I'm trying to access a server on my LAN via its public IP address. External clients can connect just fine, but I'm unable to do so from within the LAN. There is a separate rule in the NAT settings of my gateway (which translates subnet addresses to…
Bigbio2002
  • 2,843
  • 12
  • 36
  • 56
3
votes
2 answers

Why does everybody use MASQUERADE/SNAT instead of NAPT/PAT?

Story I have a VPN wireguard virtual interface wg0 (can be anything else) and a physical interface eth0. I want to route packets from the VPN to my LAN, or from an interface to another interface. Almost all the blogs, articles, tutorials advice…
None
  • 182
2
votes
4 answers

Is NAT completely transparent to a host?

Can we find a sequence of packets that a host can transmit to determine whether it is located behind a NAT box? I mean, without any special server support like STUN.
2
votes
2 answers

Linux, some packets are not being NAT

I'm trying to NAT HTTP traffic, I'm new to this and facing some issues. What I'm trying to do is NAT client HTTP requests to a webserver. CLIENT -> NAT BOX -> WEBSERVER When the client open the IP of the NAT BOX, the request should be pass to the…
1
vote
2 answers

Is it a security improvement to use NATed network?

There is a website that blocked an ISP's subnet (because attacks came from that network). The ISP gives it's users only NAT'ed IP addresses, so the clients are geting 10.x.x.x IP addresses on their routers. I asked the ISP to stop doing that…
1
vote
2 answers

Symmetric NAT conflict with port forwarding

I have one server behind NAT router that already set up port forwarding to server port 7000(server-client talk UDP). Everything is fine, except sometime the packet that is sent to client is not from port 7000, so firewall on client side drop…
voteforpedro
1
vote
5 answers

Is it possible to detect clients behind a NAT?

Recently, UC Irvine's Residential Network department changed their security policies to include the following requirement: Reconfiguration of Home Routers Home routers will need to have DHCP functionality and network address translation (NAT)…
Tacroy
  • 121
1
vote
1 answer

iptables with virtual interface

I have the following interfaces: eth0, eth0:0, and eth1. eth0:0 is virtual and also it faces WAN (interent). eth0 is 192.168.0.0/24 and eth1 is 10.0.0.0/24. How can I enable NAT and make eth0:0 as gateway for both 192.168.0.0/24 and 10.0.0.0/24…
nixnotwin
  • 1,553
  • 5
  • 35
  • 55
1
vote
1 answer

NAT - Two hosts with different private IP addresses but same public IP

I'm studying the NAT-process and I've a doubt about addressing. When the NAT translates the private IP address to a public IP address, it can translate, if properly configurated, different private IP to the same public IP . How is it possible that…
Shark44
  • 123
1
2