1

I'd like to show the parts of my slides one after the of the other. I found the \pause command, but it doesn't work with my graphics, which are in the textblock* environment for being in the position they are supposed to be because that was the only solution I could find.

When I have a slide with\pause, the figures (graphics) appear all before the first \pause can "show" them. It feels like they ignore that command.

\documentclass[10pt]{beamer}
\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage[ngerman]{babel}
\usepackage{lmodern}
\usepackage{ngerman}
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{textcomp}
\usepackage{lipsum}
\usepackage{gensymb}
\usepackage[absolute,overlay]{textpos}
\usepackage{graphicx}

\begin{document}
\begin{frame}
    \frametitle{Try 1}
    \begin{textblock*}{\textwidth}(0.8\textwidth,1cm)%specific position, I hope the numbers cannot matter...
        \includegraphics[width=4cm,keepaspectratio]{tryone.eps}
    \end{textblock*}\vfill\pause
\lipsum[1]
\pause
\lipsum[2]
\end{frame}
\end{document}

Pretty nailed it. Is the solution with\begin{textblock*}a good one at all for positioning the graphics?

Nepumuk
  • 483

1 Answers1

2

You can instruct \includegraphics on which overlays your image should be displayed, e.g. if you want it to act like of there had been a \pause before the image, use <+(1)->.

And as you have already been told in comments, you don't need graphicx in beamer.

\documentclass[10pt]{beamer}
\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage[ngerman]{babel}
\usepackage{lmodern}
\usepackage{ngerman}
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{textcomp}
\usepackage{lipsum}
\usepackage{gensymb}
\usepackage[absolute,overlay]{textpos}
%\usepackage{graphicx}

\begin{document}
\begin{frame}
    \frametitle{Try 1}
    \begin{textblock*}{\textwidth}(0.8\textwidth,1cm)%specific position, I hope the numbers cannot matter...
        \includegraphics<+(1)->[width=4cm,keepaspectratio]{example-image}
    \end{textblock*}\vfill\pause
\lipsum[1]
\pause
\lipsum[2]
\end{frame}
\end{document}
samcarter_is_at_topanswers.xyz
  • 158,329