How to make highlighting work in beamer with overlays

Question

I'm trying to use the soul package to get highlighting via \hl{some text}. I'd like to do this in overlays in beamer. I'm trying to follow the guidelines in section 9.6.1 of the beamer manual to make the \hl command overlay aware. What i'm using is

\renewcommand<>{\hl}[1]{\only#2{\beameroriginal{\hl}}{#1}}

That setup sorta/kinda works, but not exactly.

• The \hl command is overlay-aware in xelatex, but not in pdflatex or lualatex. I generally use lualatex, so that would be my preference. (Peter Grill has addressed this part in the first half of his answer)
• The overlays tend to reflow the text a bit, in a way that makes the highlighted text jump around from slide to slide in an awkward manner. You'll see that if you run the example below through xelatex. (Actually, you'll see it in all the engines, but only with the highlights in xelatex). (Peter addressed this in the TikZ part of his answer)

I've attached an MWE of the problem, which I'm sure is some simple ignorance on my part, but I can't seem to resolve.

\documentclass[presentation]{beamer}

\usepackage{xcolor,soul}
\definecolor{lightblue}{rgb}{.90,.95,1}
\sethlcolor{lightblue}
\renewcommand<>{\hl}[1]{\only#2{\beameroriginal{\hl}}{#1}}

\begin{document}
\begin{frame} {Some possibly highlighted text}

This is some normal text

\hl<2>{I'd like this text to appear on both slides, but only be
  highlighted from the second slide}

\hl<3>{I'd like this text to appear on both slides, but only be
  highlighted from the second slide.  This is a long one, so it should
be more than one line}

This is some normal text
\end{frame}
\end{document}

Answer 1

Using soul package:

Looks like the problem is that beamer redefines things. Using the patch from Why is it that coloring in soul in beamer is not visible seems to work:

Using tikz package:

As Andrew Stacey mentioned int he comments, there is a tikzmark solution as well. Using the code from How to "highlight" text/formulas with tikz?, we get:

Notes:

• Using this solution, the text is identical across the frames.

• This required a slight tweak from the code at How to "highlight" text/formulas with tikz?. The highlighter width was increased form 12pt:

    highlighter width/.initial=14pt
  

  Without this there was additional spacing in between the highlighted lines of the second paragraph.

• This does require two runs. First one to determine the locations, and the second to do the drawing.

• The \tikzmark is from Adding a large brace next to a body of text.

Further Enhancements:

• Another thing to look into would be adapting solutions from Cool Text Highlighting in LaTeX.

---

Code (soul):

\documentclass[presentation]{beamer}
\usepackage{xcolor,soul}
\definecolor{lightblue}{rgb}{.90,.95,1}
\sethlcolor{lightblue}
\renewcommand<>{\hl}[1]{\only#2{\beameroriginal{\hl}}{#1}}
% https://tex.stackexchange.com/questions/41683/why-is-it-that-coloring-in-soul-in-beamer-is-not-visible
\makeatletter
\newcommand\SoulColor{%
  \let\set@color\beamerorig@set@color
  \let\reset@color\beamerorig@reset@color}
\makeatother
\SoulColor
\begin{document}
\begin{frame} {Some possibly highlighted text}
This is some normal text
\hl<2>{I'd like this text to appear on both slides, but only be
  highlighted from the second slide}
\hl<3>{I'd like this text to appear on both slides, but only be
  highlighted from the second slide.  This is a long one, so it should
be more than one line}
This is some normal text
\end{frame}
\end{document}

---

Code (tikz):

\documentclass[presentation]{beamer}
\usepackage{xcolor}
%  https://tex.stackexchange.com/questions/46434/how-to-highlight-text-formals-with-tikz
\usepackage{tikz}
\makeatletter
%
% Highlighter code
%
\tikzset{%
  remember picture with id/.style={%
    remember picture,
    overlay,
    save picture id=#1,
  },
  save picture id/.code={%
    \edef\pgf@temp{#1}%
    \immediate\write\pgfutil@auxout{%
      \noexpand\savepointas{\pgf@temp}{\pgfpictureid}}%
  }
}
\def\savepointas#1#2{%
  \expandafter\gdef\csname save@pt@#1\endcsname{#2}%
}
\tikzdeclarecoordinatesystem{pic}{%
  @ifundefined{save@pt@#1}{%
    \pgfpointorigin
  }{%
  \pgfsys@getposition{\csname save@pt@#1\endcsname}\save@orig@pic%
  \pgfsys@getposition{\pgfpictureid}\save@this@pic%
  \pgf@process{\pgfpointorigin\save@this@pic}%
  \pgf@xa=\pgf@x
  \pgf@ya=\pgf@y
  \pgf@process{\pgfpointorigin\save@orig@pic}%
  \advance\pgf@x by -\pgf@xa
  \advance\pgf@y by -\pgf@ya
  }%
}
\newcounter{highlight}
\newcommand{\hlstart}{\tikz[remember picture with id=hlstart\the\value{highlight},baseline=-0.7ex];\hl@start}
\newcommand{\hlend}{\tikz[remember picture with id=hlend\the\value{highlight},baseline=-0.7ex];\hl@end\stepcounter{highlight}}
\newcommand{\fdstart}{\tikz[remember picture with id=hlstart\the\value{highlight},baseline=-0.7ex];\fd@start}
\newcommand{\fdend}{\tikz[remember picture with id=hlend\the\value{highlight},baseline=-0.7ex];\fd@end\stepcounter{highlight}}
\newcommand{\vlstart}{\tikz[remember picture with id=hlstart\the\value{highlight},baseline=-1em];\vl@start}
\newcommand{\vlend}{\tikz[remember picture with id=hlend\the\value{highlight},baseline=0.3ex];\vl@end\stepcounter{highlight}}
\newcommand{\hl@start}[1][]{%
  \hl@draw{highlighter}{#1}{\the\value{highlight}}}
\newcommand{\hl@end}{}
\newcommand{\fd@start}[1][]{%
  \def\fd@args{#1}}
\newcommand{\fd@end}{\def@tempa{\hl@draw{fader}}\expandafter@tempa\expandafter{\fd@args}{\the\value{highlight}}\def\fd@args{}}
\newcommand{\vl@start}[1][]{%
  \vl@draw{highlighter}{#1}{\the\value{highlight}}}
\newcommand{\vl@end}{}
\def\hl@sets{%
  \edef\hl@sx{\the\pgf@x}%
  \edef\hl@sy{\the\pgf@y}%
}
\def\hl@sete{%
  \edef\hl@ex{\the\pgf@x}%
  \edef\hl@ey{\the\pgf@y}%
}
@ifclassloaded{beamer}{
\def\page@node{
  \path (current page.south east)
      ++(-\beamer@rightmargin,\footheight)
  node[
    minimum width=\textwidth,
    minimum height=\textheight,
    anchor=south east
  ] (page) {};
}
}{
\def\page@node{
    \path (current page.north west)
    ++(\hoffset + 1in + \oddsidemargin + \leftskip,\voffset + 1in + \topmargin + \headheight + \headsep)
    node[
      minimum width=\textwidth - \leftskip - \rightskip,
      minimum height=\textheight,
      anchor=north west
    ] (page) {};
  }
}
\newcommand{\hl@draw}[3]{%
  \begin{tikzpicture}[remember picture,overlay]%
  \page@node
  \tikzset{#2,highlight=#1,every path/.append style={highlight=#1}}%
  \pgfmathsetlengthmacro{\hl@width}{\the\pgflinewidth - 1pt}%
  \coordinate (hlstart) at (pic cs:hlstart#3);
  \coordinate (hlend) at (pic cs:hlend#3);
  \tikz@scan@one@point\hl@sets(pic cs:hlstart#3)
  \tikz@scan@one@point\hl@sete(pic cs:hlend#3)
  \ifdim\hl@sy=\hl@ey\relax
  \draw (hlstart) -- (hlend);
  \else
  \draw (hlstart) -- (hlstart -| page.east);
  \pgfmathsetlengthmacro{\hl@sy}{\hl@sy -\hl@width}%
  \pgfmathsetlengthmacro{\hl@ey}{\hl@ey +\hl@width}%
  \loop\ifdim\hl@sy>\hl@ey\relax
  \draw (0,\hl@sy -| page.west) -- (0,\hl@sy -| page.east);
  \pgfmathsetlengthmacro{\hl@sy}{\hl@sy -\hl@width}%
  \repeat
  \draw (hlend -| page.west) -- (hlend);
  \fi
  \end{tikzpicture}%
}
\newcommand{\vl@draw}[3]{%
  \begin{tikzpicture}[remember picture,overlay]%
  \page@node
  \tikzset{#2,highlight=#1,every path/.append style={highlight=#1}}%
  \pgfmathsetlengthmacro{\hl@width}{\the\pgflinewidth - 1pt}%
  \coordinate (hlstart) at (pic cs:hlstart#3);
  \coordinate (hlend) at (pic cs:hlend#3);
  \tikz@scan@one@point\hl@sets(pic cs:hlstart#3)
  \tikz@scan@one@point\hl@sete(pic cs:hlend#3)
  \ifdim\hl@sx=\hl@ex\relax
  \draw (hlstart) -- (hlend);
  \else
  \draw (hlstart) -- (hlstart |- page.south);
  \pgfmathsetlengthmacro{\hl@sx}{\hl@sx -\hl@width}%
  \pgfmathsetlengthmacro{\hl@ex}{\hl@ex +\hl@width}%
  \loop\ifdim\hl@sx>\hl@ex\relax
  \draw (\hl@sx,0 |- page.north) -- (\hl@sx,0 |- page.south);
  \pgfmathsetlengthmacro{\hl@sx}{\hl@sx -\hl@width}%
  \repeat
  \draw (hlend |- page.north) -- (hlend);
  \fi
  \end{tikzpicture}%
}
\tikzset{%
  highlight/.default=highlighter,
  highlight/.style={
    color=\pgfkeysvalueof{/tikz/#1 colour},
    line width=\pgfkeysvalueof{/tikz/#1 width},
    line cap=\pgfkeysvalueof{/tikz/#1 cap},
    opacity=\pgfkeysvalueof{/tikz/#1 opacity},
  },
  highlighter colour/.initial=yellow,
  highlighter width/.initial=14pt,% <-- Tweak (was 12pt)
  highlighter cap/.initial=butt,
  highlighter opacity/.initial=1,
  fader colour/.initial=gray,
  fader width/.initial=12pt,
  fader cap/.initial=butt,
  fader opacity/.initial=.5,
}
@ifclassloaded{beamer}{
%% Beamer variants
\setbeamercolor{highlighted text}{bg=yellow}
\setbeamercolor{faded text}{fg=gray}
\newcommand<>{\highlight}[2][]{%
  \only#3{\hlstart[#1]}#2\only#3{\hlend}}
\newcommand<>{\fade}[2][]{%
  \only#3{\fdstart[#1]}#2\only#3{\fdend}}
\newcommand<>{\vhighlight}[2][]{%
  \only#3{\vlstart[#1]}#2\only#3{\vlend}}
}{
\newcommand{\highlight}[2][]{%
\hlstart[#1]#2\hlend}
\newcommand{\fade}[2][]{%
\fdstart[#1]#2\fdend}
\newcommand{\vhighlight}[2][]{%
\vlstart[#1]#2\vlend}
}
\begin{document}
\begin{frame} {Some possibly highlighted text}
This is some normal text
\highlight<2>{I'd like this text to appear on both slides, but only be
  highlighted from the second slide}
\highlight<3>{I'd like this text to appear on both slides, but only be
  highlighted from the second slide.  This is a long one, so it should
be more than one line}
This is some normal text
\end{frame}
\end{document}