Converting to bibitem in LaTeX

Question

For a conference I have to put the references in \bibitem format. After, Googling I came up with this solution by Web page:

Create a refs.bib file with all the BibTeX entries, which are easily available from Google Scholar or similar

Create a “dummy” .tex file with the following entries:
\documentclass{article}
\begin{document}
\nocite{*}
\bibliography{refs}
\bibliographystyle{plain}
\end{document}
Now, do the following:
$ latex dummy
$ bibtex dummy
$ bibtex dummy
$ latex dummy
You will see a dummy.bbl file containing all your BibTeX entries in \bibitem format.

but, the expected results was not observed for me. Any other solution or the problem with the mentioned process.

Do you have a refs.bib file? If yes, it should work, but you have to run latex twice after bibtex. See also this answer of mine. — karlkoeller, Jul 21 '13 at 10:04
The third step should be latex not bibtex. Just keep compiling :) — percusse, Jul 21 '13 at 10:06
@karlkoeller, I have checked it and exected number of times and also used the version of yours but i could not get the expected result. I have put the data in dropbox please check, maybe there is a problem with my software https://www.dropbox.com/sh/ns5at0pgyky5t2i/0tjZmBmSDR — Topdombili, Jul 21 '13 at 10:49
The problem is that your file is biblio.bib.txt and not biblio.bib. Rename it. Also remove the non-needed stuff after \end{document} in the .tex file. — karlkoeller, Jul 21 '13 at 10:54
@karlkoeller, It worked but not without \end{document}. Thanks — Topdombili, Jul 21 '13 at 11:00
You misunderstood me. I didn't mean to delete \end{document}, but the stuff after it. Happy you've solved. — karlkoeller, Jul 21 '13 at 11:03
Any chance of something similar working with BibLaTeX? I tried to repeat the same strategy, but the .bll file does not contain things that the .tex file is likely to understand (instead of "bibitem" it has "entry" and the whole syntax looks completely different to me. — Brightsun, Jun 28 '19 at 14:05
I think that you need a quick introduction to the options. If you really need use \bibtems in the main document (I doubt that), write it directly, or if you have a .bib file, use the bibtex method, then remove \bibliography{xxx}\bibliographystyle{xxx} and paste here the contents of the auxiliar .bbl file (created by bibtex in the compilation steps). — Fran, Jul 01 '19 at 11:16

Jhor · Accepted Answer · 2020-03-18T15:49:11.643

I agree whith the general process explained in the comments, but i think that they don't fully address the final task that you must do you for the conference, which very likely want a single self contained .tex file.

Let's assume that you have mypaper.tex which is your text with some \cite{<key>} and a refs.bib file. Then :

Firstly, put in mypaper.tex the two lines :

\bibliography{refs} \bibliographystyle{plain}
Secondly run (instead of using the \nocite which has two drawbacks: (1) ordering as in refs.bib and (2) cites refs. that are not \cite-d in your paper) :

(pdf)latex mypaper bibtex mypaper

If this step is successful you will get mypaper.bbl containing the bibitem-s and a mypaper.blg which is BiBTeX's log file. (Nota : latex reads the mypaper.tex -- and when present the mypaper.bbl file -- but bibtex reads the mypaper.aux created by latex).
Thirdly, (optional but recommended) make sure that all the reference are correctly inserted and displayed in the file with :

(pdf)latex mypaper
Fourthly, open mypaper.tex, comment out or discard the two \biblio... lines and paste the whole content of mypaper.bbl at the place where you want to get the bibliography. You then have the final self-contained file.

You can run (pdf)latex mypaper at least two times to get the final .dvi or .pdf.

Edit: This copy-paste holds if he .bbl file content start with the regular \begin{thebibliography}. If it starts by loading packages with \usepackage{<name>} or even by \input{<name>.sty} (where <name>= csquote, url, etc.) you must move them in your preamble. If it starts by defining commands, your can keep them at this place or move them to the preamble.

Note for the OP: you use plain as the format, which looks strange for me. Actually each conference/organization generally has its own .bst style file which produces \bibitem formated accordingly to their editorial rules. More specifically, make sure that you need an alphabetical-ordered or a citation-ordered bibliography. In the later case, you must use the unsrt.bst (or a variant) in place of plain.bst.

Any chance of something similar working with BibLaTeX? I tried to repeat the same strategy, but the .bll file does not contain things that the .tex file is likely to understand (instead of "bibitem" it has "entry" and the whole syntax looks completely different to me. — Brightsun, Jun 28 '19 at 14:05
@Brightsun actually the bbl file produced by biber is not pure LaTeX and must be further processed by bib latex macros. Perhaps using bibtex instead of viber might help. In this doesn't resolve your problem, it would be more efficientfficient to ask a new question. — Jhor, Jun 29 '19 at 16:02

lxy · Answer 2 · 2018-09-23T16:43:54.847

The Python code to convert refs.bib file to bibitem file

python2 bibtex2item.py < refs.bib > bibitem.txt

# filename: bibtex2item.py
import sys

bibtex = sys.stdin.read()
r = bibtex.split('\n')
i = 0
while i < len(r):
  line = r[i].strip()
  if not line: i += 1
  if '@' == line[0]:
    code = line.split('{')[-1][:-1]
    title = venue = volume = number = pages = year = publisher = authors = None
    output_authors = []
    i += 1
    while i < len(r) and '@' not in r[i]:
      line = r[i].strip()
      #print(line)
      if line.startswith("title"):
        title = line.split('{')[-1][:-2]
      elif line.startswith("journal"):
        venue = line.split('{')[-1][:-2]
      elif line.startswith("volume"):
        volume = line.split('{')[-1][:-2]
      elif line.startswith("number"):
        number = line.split('{')[-1][:-2]
      elif line.startswith("pages"):
        pages = line.split('{')[-1][:-2]
      elif line.startswith("year"):
        year = line.split('{')[-1][:-2]
      elif line.startswith("publisher"):
        publisher = line.split('{')[-1][:-2]
      elif line.startswith("author"):
        authors = line[line.find("{")+1:line.rfind("}")]
        for LastFirst in authors.split('and'):
          lf = LastFirst.replace(' ', '').split(',')
          if len(lf) != 2: continue
          last, first = lf[0], lf[1]
          output_authors.append("{}, {}.".format(last.capitalize(), first.capitalize()[0]))
      i += 1

    print "\\bibitem{%s}" % code
    if len(output_authors) == 1:
      print output_authors[0] + " {}. ".format(title),
    else:
      print ", ".join(_ for _ in output_authors[:-1]) + " & " + output_authors[-1] + " {}. ".format(title),
    if venue:
      print "{{\\em {}}}.".format(" ".join([_.capitalize() for _ in venue.split(' ')])),
      if volume:
        sys.stdout.write(" \\textbf{{{}}}".format(volume))
      if pages:
        sys.stdout.write(", {}".format(pages) if number else " pp. {}".format(pages))
      if year:
        sys.stdout.write(" ({})".format(year))
    if publisher and not venue:
      print "({},{})".format(publisher, year)
    print
    print

sample input

@article{karrer2011stochastic,
  title={Stochastic blockmodels and community structure in networks},
  author={Karrer, Brian and Newman, Mark EJ},
  journal={Physical Review E},
  volume={83},
  number={1},
  pages={016107},
  year={2011},
  publisher={APS}
}

sample output

\bibitem{karrer2011stochastic}
Karrer, B. & Newman, M. Stochastic blockmodels and community structure in networks.  {\em Physical Review E}. \textbf{83}, 016107 (2011)

score 3 · Answer 3 · answered Sep 19 '20 at 17:51

Modified for python3

# filename: bibtex2item.py
# python2 bibtex2item.py 
import sys
bibtex = sys.stdin.read()
try:
    bibtex=open("refs.bib")
except IOError:
    print("File not found or path is incorrect")
finally:
    print("exit")
bibtex = bibtex.readlines()
print(bibtex)
r = bibtex.split('\n')
r = bibtex
i = 0
while i < len(r):
  line = r[i].strip()
  if not line: i += 1
  if '@' == line[0]:
    code = line.split('{')[-1][:-1]
    title = venue = volume = number = pages = year = publisher = authors = None
    output_authors = []
    i += 1
    while i < len(r) and '@' not in r[i]:
      line = r[i].strip()
      #print(line)
      if line.startswith("title"):
        title = line.split('{')[-1][:-2]
      elif line.startswith("journal"):
        venue = line.split('{')[-1][:-2]
      elif line.startswith("volume"):
        volume = line.split('{')[-1][:-2]
      elif line.startswith("number"):
        number = line.split('{')[-1][:-2]
      elif line.startswith("pages"):
        pages = line.split('{')[-1][:-2]
      elif line.startswith("year"):
        year = line.split('{')[-1][:-2]
      elif line.startswith("publisher"):
        publisher = line.split('{')[-1][:-2]
      elif line.startswith("author"):
        authors = line[line.find("{")+1:line.rfind("}")]
        for LastFirst in authors.split('and'):
          lf = LastFirst.replace(' ', '').split(',')
          if len(lf) != 2: continue
          last, first = lf[0], lf[1]
          output_authors.append("{}, {}.".format(last.capitalize(), first.capitalize()[0]))
      i += 1
print(&quot;\\bibitem{%s}&quot; % code)
if len(output_authors) == 1:
  print(output_authors[0] + &quot; {}. &quot;.format(title),)
else:
  print(&quot;, &quot;.join(_ for _ in output_authors[:-1]) + &quot; &amp; &quot; + output_authors[-1] + &quot; {}. &quot;.format(title),)
if venue:
  print (&quot;{{\\em {}}}.&quot;.format(&quot; &quot;.join([_.capitalize() for _ in venue.split(' ')])),)
  if volume:
    sys.stdout.write(&quot; \\textbf{{{}}}&quot;.format(volume))
  if pages:
    sys.stdout.write(&quot;, {}&quot;.format(pages) if number else &quot; pp. {}&quot;.format(pages))
  if year:
    sys.stdout.write(&quot; ({})&quot;.format(year))
if publisher and not venue:
  print(&quot;({},{})&quot;.format(publisher, year))
print
print

Suhail Abdullah · Answer 4 · 2019-05-23T12:10:19.020

Well, I used this matlab function to convert it automatically one by one, its more easy to get the job done. You can download it from GitHub, and here is the matlab function as the following.

function [bibitem] = bibtex2bibitemtv(bibtexpath)
path = bibtexpath;
cells = importdata(path);
A = string(cells);
n = length(cells);
K_name = strings(n,1);
citecode = extractBetween(A(1),'{',',');
SVacI = zeros(9,1); % Substyle Vacation Indicator. 

for i = 2:1:n-1
        rawleft = extractBefore(A(i),'=');
        K_name(i) = strtrim(rawleft);
%       %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
        if strcmp(K_name(i),"author")
            SVacI(1) = 1;
            rawright = extractAfter(A(i),'=');
            ccb = regexp(rawright,'}');     % ccb = [check curly bracket]
            if (ccb~=0)
                author = strtrim(extractBetween(A(i),'{','}'));
            else 
                author = strtrim(extractBetween(A(i),'=',','));
            end 
%       %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%           
        elseif strcmp(K_name(i),"title")
            SVacI(2) = 1;
            rawright = extractAfter(A(i),'=');
            ccb = regexp(rawright,'}');     % ccb = [check curly bracket]
            if (ccb~=0)
                title = strtrim(extractBetween(A(i),'{','}'));
            else 
                title = strtrim(extractBetween(A(i),'=',','));
            end 
%       %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
        elseif strcmp(K_name(i),"journal")
            SVacI(3) = 1;
            rawright = extractAfter(A(i),'=');
            ccb = regexp(rawright,'}');     % ccb = [check curly bracket]
            if (ccb~=0)
                journal = strtrim(extractBetween(A(i),'{','}'));
            else 
                journal = strtrim(extractBetween(A(i),'=',','));
            end 
%       %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
        elseif strcmp(K_name(i),"volume")
            SVacI(4) = 1;
            rawright = extractAfter(A(i),'=');
            ccb = regexp(rawright,'}');     % ccb = [check curly bracket]
            if (ccb~=0)
                volume = strtrim(extractBetween(A(i),'{','}'));
            else 
                volume = strtrim(extractBetween(A(i),'=',','));
            end
%       %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
        elseif (strcmp(K_name(i),"number"))||(strcmp(K_name(i),"issue"))
            SVacI(5) = 1;
            rawright = extractAfter(A(i),'=');
            ccb = regexp(rawright,'}');     % ccb = [check curly bracket]
            if (ccb~=0)
                number = strtrim(extractBetween(A(i),'{','}'));
            else 
                number = strtrim(extractBetween(A(i),'=',','));
            end
%       %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
        elseif strcmp(K_name(i),"pages")
            SVacI(6) = 1;
            rawright = extractAfter(A(i),'=');
            ccb = regexp(rawright,'}');     % ccb = [check curly bracket]
            if (ccb~=0)
                pages = strtrim(extractBetween(A(i),'{','}'));
            else 
                pages = strtrim(extractBetween(A(i),'=',','));
            end
%       %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
        elseif strcmp(K_name(i),"month")
            SVacI(7) = 1;
            rawright = extractAfter(A(i),'=');
            ccb = regexp(rawright,'}');     % ccb = [check curly bracket]
            if (ccb~=0)
                month = strtrim(extractBetween(A(i),'{','}'));
            else 
                month = strtrim(extractBetween(A(i),'=',','));
            end
%       %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
        elseif strcmp(K_name(i),"year")
            SVacI(8) = 1;
            rawright = extractAfter(A(i),'=');
            ccb = regexp(rawright,'}');     % ccb = [check curly bracket]
            if (ccb~=0)
                year = strtrim(extractBetween(A(i),'{','}'));
            else 
                year = strtrim(extractBetween(A(i),'=',','));
            end
%       %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
        elseif strcmp(K_name(i),"publisher")
            SVacI(9) = 1;
            rawright = extractAfter(A(i),'=');
            ccb = regexp(rawright,'}');     % ccb = [check curly bracket]
            if (ccb~=0)
                publisher = strtrim(extractBetween(A(i),'{','}'));
            else 
                publisher = strtrim(extractBetween(A(i),'=',','));
            end           
%       %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
% For adding new references sections.
        else
            msg = join(["Sorry!","[", K_name(i), "]","is not being handled by the program."]);
            disp(msg)
        end
end
% @-> Style reference term code varifications. 
%                  msg = join(["author","=",SVacI(1);...
%                              "title","=",SVacI(2);...
%                              "journal","=",SVacI(3);...
%                              "volume","=",SVacI(4);...
%                              "number","=",SVacI(5);...
%                              "pages","=",SVacI(6);...
%                              "month","=",SVacI(7);...
%                              "year","=",SVacI(8);...
%                              "publisher","=",SVacI(9)]);
%                              disp(SVacI)

              if (SVacI(1)==0)||(SVacI(2)==0)||(SVacI(3)==0)||(SVacI(8)==0)
                  bibitem = sprintf('THE ARTICLE IS NOT CORRECT. THE AUTHOR, TITLE, JOURNAL AND YEAR SECTIONS ARE COMPULSORY! PLEASE INCLUDE THEM AND RE-RUN THE SOFTWARE:)');
              elseif all(SVacI == [1    1   1   0   0   0   0   1   0])
                  bibitem = sprintf(' \n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s},(%s). \n',citecode,author,title,journal,year);
              elseif all(SVacI == [1    1   1   0   0   0   0   1   1])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s},(%s). %s.\n',citecode,author,title,journal,year,publisher);
              elseif all(SVacI == [1    1   1   0   0   0   1   1   0])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s},(%s %s). \n',citecode,author,title,journal,month,year);
              elseif all(SVacI == [1    1   1   0   0   0   1   1   1])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s},(%s %s). %s.\n',citecode,author,title,journal,month,year,publisher);
              elseif all(SVacI == [1    1   1   0   0   1   0   1   0])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, pp. %s,(%s).\n',citecode,author,title,journal,pages,year);
              elseif all(SVacI == [1    1   1   0   0   1   0   1   1])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, pp. %s,(%s). %s.\n',citecode,author,title,journal,pages,year,publisher);
              elseif all(SVacI == [1    1   1   0   0   1   1   1   0])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, pp. %s,(%s %s).\n',citecode,author,title,journal,pages,month,year);
              elseif all(SVacI == [1    1   1   0   0   1   1   1   1])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, pp. %s,(%s %s). %s.\n',citecode,author,title,journal,pages,month,year,publisher);
              elseif all(SVacI == [1    1   1   0   1   0   0   1   0])
                  disp("Attention! THE VOLUME HAS TO BE ASSOCIATED WITH NUMBER, PLEASE CHECK!") 
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s,(%s).\n',citecode,author,title,journal,number,year);
              elseif all(SVacI == [1    1   1   0   1   0   0   1   1])
                  disp("Attention! THE VOLUME HAS TO BE ASSOCIATED WITH NUMBER, PLEASE CHECK!") 
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s,(%s). %s.\n',citecode,author,title,journal,number,year,publisher);
              elseif all(SVacI == [1    1   1   0   1   0   1   1   0])
                  disp("Attention! THE VOLUME HAS TO BE ASSOCIATED WITH NUMBER, PLEASE CHECK!") 
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s,(%s %s).\n',citecode,author,title,journal,number,month,year);
              elseif all(SVacI == [1    1   1   0   1   0   1   1   1])
                  disp("Attention! THE VOLUME HAS TO BE ASSOCIATED WITH NUMBER, PLEASE CHECK!") 
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s,(%s %s). %s.\n',citecode,author,title,journal,number,month,year,publisher);
              elseif all(SVacI == [1    1   1   0   1   1   0   1   0])
                  disp("Attention! THE VOLUME HAS TO BE ASSOCIATED WITH NUMBER, PLEASE CHECK!") 
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s, pp. %s,(%s).\n',citecode,author,title,journal,number,pages,year);
              elseif all(SVacI == [1    1   1   0   1   1   0   1   1])
                  disp("Attention! THE VOLUME HAS TO BE ASSOCIATED WITH NUMBER, PLEASE CHECK!") 
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s, pp. %s,(%s). %s.\n',citecode,author,title,journal,number,pages,year,publisher);
              elseif all(SVacI == [1    1   1   0   1   1   1   1   0])
                  disp("Attention! THE VOLUME HAS TO BE ASSOCIATED WITH NUMBER, PLEASE CHECK!") 
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s, pp. %s,(%s %s). %s.\n',citecode,author,title,journal,number,pages,month,year);
              elseif all(SVacI == [1    1   1   0   1   1   1   1   1])
                  disp("Attention! THE VOLUME HAS TO BE ASSOCIATED WITH NUMBER, PLEASE CHECK!") 
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s, pp. %s,(%s %s). %s.\n',citecode,author,title,journal,number,pages,month,year,publisher);
              elseif all(SVacI == [1    1   1   1   1   0   0   1   0])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s(%s),(%s).\n',citecode,author,title,journal,volume,number,year);
              elseif all(SVacI == [1    1   1   1   1   0   0   1   1])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s(%s),(%s). %s.\n',citecode,author,title,journal,volume,number,year,publisher);
              elseif all(SVacI == [1    1   1   1   1   0   1   1   0])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s(%s),(%s %s).\n',citecode,author,title,journal,volume,number,month,year);
              elseif all(SVacI == [1    1   1   1   1   0   1   1   1])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s(%s),(%s %s). %s.\n',citecode,author,title,journal,volume,number,month,year,publisher);
              elseif all(SVacI == [1    1   1   1   1   1   0   1   0])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s(%s), pp. %s,(%s).\n',citecode,author,title,journal,volume,number,pages,year);
              elseif all(SVacI == [1    1   1   1   1   1   0   1   1])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s(%s), pp. %s,(%s). %s.\n',citecode,author,title,journal,volume,number,pages,year,publisher);
              elseif all(SVacI == [1    1   1   1   1   1   1   1   0])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s(%s), pp. %s,(%s %s). %s.\n',citecode,author,title,journal,volume,number,pages,month,year);
              elseif all(SVacI == [1    1   1   1   1   1   1   1   1])
                  bibitem = sprintf('\n \\bibitem{%s}\n %s.\n \\newblock {%s.} \n \\newblock {\\emph %s}, %s(%s), pp. %s,(%s %s). %s.\n',citecode,author,title,journal,volume,number,pages,month,year,publisher);
              end

end Sample input:

@article{thompson1990home,
  title={In-home pasteurization of raw goat's milk by microwave treatment},
  year={1990},  
  author={Thompson, J Stephen and Thompson, Annemarie},
  journal={International journal of food microbiology},
  volume={10},
  number={1},
  pages={59--64},
  publisher={Elsevier}
}

Sample Output:

  \bibitem{lewis2009heat}
  Lewis, MJ and Deeth, HC.
  \newblock {Heat treatment of milk.} 
  \newblock {\emph Milk processing and quality management}, 3(193), pp. 168--204,(Jan. 2009). Wiley Online Library.

This code is already updated and now its a stable code. Currently working on more features, then will be update here later. — Suhail Abdullah, May 23 '19 at 12:12

Converting to bibitem in LaTeX

4 Answers4

sample input

sample output

bibtex = sys.stdin.read()

print(bibtex)

r = bibtex.split('\n')

Linked