I have problems in splitting one table in 2 using landscape mode: I tried to generate it from tablesgeneraton to have it correct, but the longtable command does not work, and the table exit from one page in landascape mode.
No errors from the server give me any hint.
I would like to split it into two, horizontal pages.
Here the full code (hopefully a correct MWE - I cannot add the document class since it is a tailored one, but article, or book give me the same outcome):
\documentclass{book}
\usepackage{pdflscape}
\usepackage{longtable}
\usepackage{booktabs}
\begin{document}
\begin{landscape}
\begin{longtable}{lllllllllll}
\caption{} \
\label{tab:my-table}\
\toprule
Reference & Seed generation & Production method & Seed addition & Crystallization unit & Dimensions & Flow pattern & Material and dispersant & Size size control & Yield estimation & Solid loading \ \midrule
Present work & Off-line & Batch + filtration & Continuous & Tubular microreactor & 1 mm ID, 60 cm L & Two-phase \newline bubble flow & PCM in water & CSD, sieving, \newline filtering & Yes & 2%, 0.8% wt \
\cite{Eder2010} & Off-line & Batch in solution & Continuous & Tubular reactor & 2 mm ID, 15 m L & Single-phase & ASA in ethanol & CSD & 569% \newline mean mass flow/total seed flow & 5%wt \
\cite{Eder2011} & Off-line & Batch in solution & Continuous & Tubular reactor & 2 mm ID, 15 m L & Single-phase & ASA in ethanol & CSD & 779-407-348% \newline mean mass flow/total seed flow & 7, 14, 16% wt \
\cite{Eder2012} & In-line & US-aided nucleation & Continuous & Tubular reactor & 2 mm ID, 27 m L & Two-phase slug flow & ASA in ethanol & CSD & 172-700% mean mass flow/ \newline total seed flow & Based on relative flow rate \
\cite{Jiang2014} & In-line & Micromixing (cooling) & Continuous & Tubular reactor & 3.1 mm ID, 15.2 m L & Two-phase slug flow & LAM in water & No & 87% product solid/total solid & / \
\cite{Jiang2015} & In-line & US-aided nucleation & Continuous & Tubular reactor & 3.1 mm ID, 15.2 m L & Two-phase slug flow & LAM in water & No & 74% product solid/ total solid & / \
\cite{Jordens2017} & In-line & US-aided nucleation and growth & Semi-continuous & Tubular nucleation + \newline batch growth & 5 mm ID, 7 m L tubular nucleation \newline 53x83x97 mm batch vessel & Single-phase & PCM in water & No & No & / \
\cite{Wong2013} & In-line & Single crystal contact nucleation & Continuous & Nucleator + \newline tubular reactor & 3.2 mm ID \newline 20 ft L & Single-phase & Glycine/PCM in water & CSD & No & Single crystal \
\cite{MendezDelRio2006} & In-line & Cooling & Continuous & Tubular nucleation (LFTC) + \newline batch growth & 1.6 mm ID, 7.62 m L LFTC \newline 500 ml batch vessel & Single-phase & PCM in ethanol/methanol & No & No & / \
\cite{Fatemi2021} & In-line & Cooling & Continuous & Tubular microreactor + \newline tubular growth & 1 mm ID, 60 cm L tubular nucleation \newline 2 mm ID, 1.4, 4, 8 m L tubular growth & Two-phase bubble flow & PCM in water & No & 2-70% measured/ \newline maximum concentration & / \ \bottomrule
\end{longtable}
\end{landscape}
\end{document}
Could you please help me see where I am doing it wrong? Thank you!
\labelshould be in the \caption command not on a line of its own but that will just make bad output, nit an error. – David Carlisle May 22 '21 at 10:30xltabularinstead oflongtable. (Something like\begin{xltabular}{\linewidth}{lXXXXXXXXXX}could get you started. Depending on the size of the textblock this might lead to overlaps or too narrow columns.) Other approaches can be found here: My table doesn't fit; what are my options? – leandriis May 23 '21 at 08:20