Compiling the following tables?

Question

Can someone compile the following three tables and attach the outputs as a photo?

Table 1:

\documentclass{article}
\usepackage{geometry}
\usepackage{tabularray} 
\UseTblrLibrary{booktabs}
\begin{document}
    \noindent\begin{tblr}{colspec = {| Q[c,$] X[l] |
                                       Q[c,$] X[l] |},
                           row{1} = {mode=text},
                         row{2-Y} = {belowsep+=2pt}
                         } 
    \toprule
Parameter & Description & Parameter & Description\
    \midrule
b     & Influx rate of the popu-la-tion 
            & \sigma  & Progression rate from the asymptomatic compartment to the symptomatic compartment  \
\mu & Natural death rate 
            & \gamma_A       & Non-treatment recovery rate of asymptomatic individuals \
\beta_A & Transmission rate of the asymptomatic compartment 
            & \gamma_I       & Non-treatment recovery rate of symptomatic individuals      \
\beta_I & Transmission rate of the symptomatic compartment 
            & \eta & Treatment rate of symptomatic individuals      \
\nu       & Vaccination rate of newborns
            & \xi     & Immunity loss rate     \
\rho       & Vaccination rate of susceptibles 
            & \alpha       & Disease induced death rate                    \
\bottomrule

\end{tblr}
\end{document}

Table 2:

\documentclass{article}
\usepackage{geometry}
\usepackage{tabularray} 
\UseTblrLibrary{booktabs}
\begin{document}
    \noindent\begin{tblr}{colspec = {| Q[c,$] X[l] |
                                       Q[c,$] X[l] |},
                           row{1} = {mode=text},
                         row{2-Y} = {belowsep+=2pt}
                         } 
        \toprule
    Parameter & Sensitivity index & Parameter & Sensitivity index\
        \midrule
    b     & +1.000 
                & \sigma  & -0.447  \
    \mu & -0.453 
                & \gamma_A       & -0.417    \
    \beta_A & +0.891 
                & \gamma_I       & -0.013      \
    \beta_I & +0.109 
                & \eta & -0.093      \
    \nu       & -2.667 
                & \xi & +0.324      \
    \rho       & -0.901 
                & \alpha       & -0.001                    \
    \bottomrule
\end{tblr}

\end{document}

Table 3:

\documentclass{article}
    \usepackage{geometry}
    \usepackage{tabularray} 
    \UseTblrLibrary{booktabs}
\begin{document}
    \noindent\begin{tblr}{colspec = {| Q[c,$] X[l] |
                                       Q[c,$] X[l] |},
                           row{1} = {mode=text},
                         row{2-Y} = {belowsep+=2pt}
                         } 
        \toprule
    Parameter &amp; Sensitivity index &amp; Parameter &amp; Sensitivity index\\
        \midrule
    b     &amp; +1.000 
                &amp; \sigma  &amp; -0.215  \\
    \mu &amp; -0.223 
                &amp; \gamma_A       &amp; -0.052    \\
    \beta_A &amp; +0.277 
                &amp; \gamma_I       &amp; -0.594      \\
    \beta_I &amp; +0.723 
                &amp; \eta     &amp; -0.116     \\
    \nu       &amp; -0.222 
                &amp; \xi     &amp; +0.102      \\
    \rho       &amp; -0.901 
                &amp; \alpha       &amp; -0.001                    \\

        \bottomrule
    \end{tblr}
\end{document}

EDIT:

This is the version I'm using:

This is pdfTeX, Version 3.14159265-2.6-1.40.20 (MiKTeX 2.9.7050) entering extended mode

The error outputted in a fresh document:

! LaTeX Error: File `tabularray.sty' not found.
Type X to quit or <RETURN> to proceed,
or enter new name. (Default extension: sty)
Enter file name:

EDIT 2:

After installing tabularray package and all the latest updates on MikTex console, my document that was compiling before is not compiling anymore with the following error:

Package tabularray Warning: Your LaTeX release is too old.
(tabularray)                Please update to 2020-10-01 first.
! Undefined control sequence.
\NewDashStyle code ...tmpa_seq {4}}\tl_if_eq:NnT 
                                                  \l__tblr_a_tl {on}{\tl_if...
l.1114 ...ashStyle {dashed} {on ~ 2pt ~ off ~ 2pt}
?

EDIT 3:

Using Celdor's comments, I installed miktex from the link he sent, the tables compiled but they're not identical as I thought they'd be:

We see, the second is much "bulkier"? I want it like the one provided in Zarko's solution: How to draw a vertical line in a table? as it looks better in my opinion.

@mickep I asked a similar question here: https://tex.stackexchange.com/questions/624752/how-to-draw-a-vertical-line-in-a-table/624792?noredirect=1#comment1584855_624792. The table will not compile for me for some reason.. — Math, Jun 09 '22 at 14:18
@Math show your log file, so it shows the version you have, and the error. As posted there is no question here. — David Carlisle, Jun 09 '22 at 14:24
@DavidCarlisle I am using TeXworks, I don't see a log file. I just had a look at my other documents, none of them have a log filed saved.. — Math, Jun 09 '22 at 14:26
@egreg Strange it works for everyone but not me(!), I would of course not ask to compile a code if I could do it myself... — Math, Jun 09 '22 at 14:31
@Math In the directory with your .tex file you will find a .log file. Look through the end of that to see what's wrong. Texworks should also have an option to show you the console if something went wrong. — Teepeemm, Jun 09 '22 at 14:32
@Teepeemm You find the log file in the same folder as the main document. And if they “don't compile” you should receive some error messages, don't you? — egreg, Jun 09 '22 at 14:33
I have added the error I get in a fresh document in the question. — Math, Jun 09 '22 at 14:36
The error message says tabularray is not installed. Did you try to install it with MiKTeX Package Manager? — Bernard, Jun 09 '22 at 14:38
texworks is just the editor you used to write the source, it is not related to the tex system you used to process the file. — David Carlisle, Jun 09 '22 at 14:41
@Bernard I have the packages installed with all the latest updates — Math, Jun 09 '22 at 14:53
I tried compiling again, now I have this error... edited in question — Math, Jun 09 '22 at 14:54
The error tells you about the missing package. If you have everything updated and still can't compile, with the same error, the package is still missing. The manager (of whatever distribution you are using) is not going to add anything else if it has not been installed in the first place, unless you explicitly instruct the manager to do so. — Celdor, Jun 09 '22 at 14:58
@Celdor I got another error after installing the package, see edit 2 in the question — Math, Jun 09 '22 at 15:00
Well, your distribution is too old for tabularray :) EDIT. Since you wrote, everything was up to date, I am afraid you will need to install TeX distribution, manually. Either TexLive or MikTeX will do. — Celdor, Jun 09 '22 at 15:01
I don't know how TeX is installed on your machine but you may need to uninstall the previous distribution, completely. Then, visit this link Tex Live 2022, download an installer for your OS and run it. I would recommend to select everything (~7GB). If it's too much, you will have to add other packages on demand via a manager. The file should compile without errors, afterwards. As a side note, it doesn't matter where you compile it from: TexPad, TexStudio, or manually using command line! — Celdor, Jun 09 '22 at 15:21
Does the provided answer solve your problem? At least reply to it :) — Dr. Manuel Kuehner, Oct 24 '22 at 14:28

score 1 · Answer 1 · answered Jun 09 '22 at 14:42

All tree tables compile in one page:

Your code with little changes:

\documentclass{article}
\usepackage[a4paper,margin=1cm]{geometry} %<-- modified
\usepackage{tabularray} 
\UseTblrLibrary{booktabs}
\begin{document}
\noindent\begin{tblr}{colspec = {@{} Q[c,$] X[l] |
                                    Q[c,$] X[l] @{}},
                       row{1} = {mode=text},
                     row{2-Y} = {belowsep+=2pt}
                     }

    \toprule
Parameter & Description & Parameter & Description\
    \midrule
b     & Influx rate of the popu-la-tion 
            & \sigma  & Progression rate from the asymptomatic compartment to the symptomatic compartment  \
\mu & Natural death rate 
            & \gamma_A       & Non-treatment recovery rate of asymptomatic individuals \
\beta_A & Transmission rate of the asymptomatic compartment 
            & \gamma_I       & Non-treatment recovery rate of symptomatic individuals      \
\beta_I & Transmission rate of the symptomatic compartment 
            & \eta & Treatment rate of symptomatic individuals      \
\nu       & Vaccination rate of newborns
            & \xi     & Immunity loss rate     \
\rho       & Vaccination rate of susceptibles 
            & \alpha       & Disease induced death rate                    \
\bottomrule

\end{tblr}
\vspace{.5cm} %<-- added
\noindent\begin{tblr}{colspec = {| Q[c,$] X[l] |
            Q[c,$] X[l] |},
        row{1} = {mode=text},
        row{2-Y} = {belowsep+=2pt}
    } 
    \toprule
    Parameter & Sensitivity index & Parameter & Sensitivity index\
    \midrule
    b     & +1.000 
    & \sigma  & -0.447  \
    \mu & -0.453 
    & \gamma_A       & -0.417    \
    \beta_A & +0.891 
    & \gamma_I       & -0.013      \
    \beta_I & +0.109 
    & \eta & -0.093      \
    \nu       & -2.667 
    & \xi & +0.324      \
    \rho       & -0.901 
    & \alpha       & -0.001                    \
\bottomrule

\end{tblr}
\vspace{.5cm}% <-- added
\noindent\begin{tblr}{colspec = {| Q[c,$] X[l] |
            Q[c,$] X[l] |},
        row{1} = {mode=text},
        row{2-Y} = {belowsep+=2pt}
    } 
    \toprule
    Parameter & Sensitivity index & Parameter & Sensitivity index\
    \midrule
    b     & +1.000 
    & \sigma  & -0.215  \
    \mu & -0.223 
    & \gamma_A       & -0.052    \
    \beta_A & +0.277 
    & \gamma_I       & -0.594      \
    \beta_I & +0.723 
    & \eta     & -0.116     \
    \nu       & -0.222 
    & \xi     & +0.102      \
    \rho       & -0.901 
    & \alpha       & -0.001                    \
\bottomrule

\end{tblr}
\end{document}

Compiling the following tables?

1 Answers1