2

I am having difficulties finding some scrap piece of leather in order to make myself a strop in order to aid the sharpening process for my plane blades and chisels.

enter image description here

I was thinking to use this kind of (hopefully) genuine leather and I am not sure if it is a good idea. I mean the oxide-loaded strop:

enter image description here

Is it feasible?

Andrei Rînea
  • 1,085
  • 3
  • 11
  • 26
  • Not the ideal material, no. Even thought the Q wasn't really about this I covered a lot of the relevant territory in a previous Answer, here. – Graphus Oct 21 '19 at 06:43
  • Check the Good Will or Salvation Army for an old, wide belt. – NothingToSeeHere Oct 21 '19 at 11:10
  • Or check your local craft or artisan meetups. Leather workers often have suitable scraps of heavy leather you can load up with your levels of compound. –  Oct 21 '19 at 14:00
  • 2
    Just for reference this kind of leather is know as "chamois". https://en.wikipedia.org/wiki/Chamois_leather . It is probably the softest kind of leather around, which is the exact opposite of what you want for a strop. "Horse butt" leather is widely regarded as the best leather for strops due to how hard it is. – SaSSafraS1232 Oct 21 '19 at 16:55
  • @SaSSafraS1232, horse butt or something similar is only really of importance for those intending to strop on the bare leather. – Graphus Oct 22 '19 at 06:50
  • Another good option for stropping is loading green buffing compound on MDF. – SaSSafraS1232 Oct 22 '19 at 15:58

2 Answers2

3

To answer the question at hand, no. This is not appropriate material for stropping tool edges.

Let's aggregate the answers that popped up in comments:

  • Check this Answer for hints
  • Look around for a local leatherworker to acquire scraps of heavier hide suitable for turning into a strop
  • Check charity shops for an old "full grain" leather belt (i.e., not compressed or bonded leather)
  • "Full Grain Leather" is what he needs. I think the compressed kind is called "Bonded Leather." – NothingToSeeHere Oct 21 '19 at 19:27
  • 1
    @Ring, important take-home message from the previous Answer is that OP doesn't need leather at all if he's intending on using compound. – Graphus Oct 22 '19 at 06:47
2

I agree with the prior answer and comments and thought I would add another suggestion to try. A very flat smooth piece of wood such as a finish grade plywood makes a great strop or base for a leather strop. I have piece of plywood that I applied stropping compound to and it works great. As a woodworker it easy to make a strop like this of any size or shape you like with or without a handle. And you are pretty much guaranteed to have the material laying in your scrap bin right now.

JPM
  • 41
  • 4
  • Good point. In fact, for some of my larger blades, a softer wood "strop" would make more sense. I'm going to try it when I get around to putting a new edge on my block plane and repairing an unfortunate paring chisel that got really rust damaged. –  Oct 23 '19 at 19:47